- Sets of Polishing Pads and Polishing Kits
-
Wet/Dry Complete Set of Diamond Polishing Pads 10+1+ Densifier: 4" set come with ten pads grit #30, #50, #100, #200, #400, #800, #1500, #6000, #10000 (or request any custom set of 10 via email), a rubber Velcro
holder
with standard 5/8-11 thread, a pint of densifier/sealer for
surface treatment to make the stone shine. Other size 3"
5", 6", 7" sets come with 9 pads grit #50-10000. 6" and 7"
sets come with an aluminum Velcro holder.
Click here to view the user guide!
Complete Polishing Kit: 800W 120V variable speed motor, 12ft power cord double insulated and GFCI protected. Each
kit come with
8 pads grit #50, #100, #200, #400, #800, #1500, #3000, #10000 a Velcro holder, and 1 quart of
densifier. Click to view
Polishing Kit user guide.
Dry Only Polishing Kit (for small job): 350W 120V motor 4500 rpm. Each kit come with 7 dry
polishing pads grit #50,
#100, #200, #400, #800, #1500, #3000, a Velcro holder, and 1
pint of
densifier. Click to
view dry polishing kit user guide.
- 3" Diamond Polishing Pads
-
3" general purpose pads:
good for all natural and artificial stones including
granite,
concrete, marble, travertine, porcelain, ceramic...
Actual size is 8cm or just over 3".
Select 3" General Purpose Pads3" hard white resin pads: good for hard natural and artificial stones including granite,
concrete, porcelain, ceramic...
Select 3" White Resin Pads
Thick 3" floor pads: ~1/2" thick, good for most natural and artificial stones including
granite, concrete, terrazzo, porcelain, ceramic...Designed
for long-lasting use especially in multi-head polishers.
Select Thick 3" Floor Pads
3" dry polishing pads: good for all natural and artificial stones including granite,
concrete, terrazzo, porcelain, ceramic, marble,
travertine...Dedicated dry polishing pads designed for very
fast and aggressive cutting.
Select 3" Dry Polishing Pads - 4" Diamond Polishing Pads
-
4" general purpose pads:
good for all natural and artificial stones including
granite,
concrete, marble, travertine, porcelain, ceramic...
Select 4" General Purpose Pads4" hard white resin pads: good for hard natural and artificial stones including granite, concrete, porcelain, ceramic...
Grit #800 and higher are not recommended for soft stones
like marble and travertine.
Select 4" White Resin PadsThick 4" floor pads: ~1/2" thick, good for most natural and artificial stones including
granite, concrete, terrazzo, porcelain, ceramic...Designed
for long-lasting use especially in multi-head polishing machines.
Select Thick 4" Floor Pads
4" dry polishing pads: good for all natural and artificial stones including granite,
concrete, terrazzo, porcelain, ceramic, marble,
travertine...Dedicated dry pads for very fast and aggressive
cutting.
Select 4" Dry Polishing Pads4" Dry honey comb pads: good for all natural and artificial stones including granite,
concrete, terrazzo, porcelain, ceramic, marble,
travertine...Dedicated dry pads for very fast and aggressive
cutting.
Select 4" Dry Honey Comb Pads
- 5" Diamond Polishing Pads
5" hard white resin pads: good for hard natural and artificial stones including granite,
concrete, porcelain, ceramic...
Select 5" White Resin Pads5" dry polishing pads: good for all natural and artificial stones including granite,
concrete, terrazzo, porcelain, ceramic, marble,
travertine...Dedicated dry pads for very fast and aggressive
cutting.
Select 5" Dry Polishing Pads- 6" Diamond Polishing Pads
6" hard white resin pads: good for hard natural and artificial stones including granite,
concrete, porcelain, ceramic...
Select 6" White Resin Pads- 7" Diamond Polishing Pads
7" hard white resin pads: good for hard natural and artificial stones including granite,
concrete, porcelain, ceramic... Professional
grade pads with super high diamond content.
Select 7" White Resin Pads- Core Bits and Router Bits
Core bits: are designed to cut holes in stone. Our wet core bits come with standard 5/8-11 female thread for
mounting to a polisher or
grinder. No centering bit for faster cutting. Use three strips of wood to
center the bit into place before beginning to cut.
Standard faucet hole of 1-3/8"; standard kitchen drain 2"; 2.5" and
3" sizes are available.
Half-bullnose Router Bits: also called radial round over and designated as B bits. It will
cut a
quarter of a circle profile. The number that follow a B bit
designation is the radius of the
curvature measured in millimeter. For example: B20 bit cut a
quarter circle with a
radius of 20mm or ~3/4". Come with standard 5/8-11 thread.
We have B5(3/16"); B10(3/8"); B20(3/4"); B25(1"); B30(1-1/4").
Full bullnose V Router Bits: This bit will cut a half circle profile. The number that
follow a V bit
designation is the diameter of the
curvature measured in millimeter. For example: B40 bit cut a
half circle with a radius of
40mm or ~1.5". Our V40 is adjusted to fit 1.5" slab. M
bit will cut the edge to look like a stair tread or an uneven bull nose.
Ours bits come with
standard 5/8-11 thread. (M14 thread may be available by special
request). We have
V20(3/4"); V30(1-1/4"); V40(1-1/2").
- Diamond Grinding Cups and Grinding Wheels
These cups are designed to remove lot of material quickly prior to polishing. They are ideal for grinding off the top surface such as the cream layer of concrete to expose aggregates prior to polishing. Three sizes of cups are available from the light weight turbo cup to the long lasting double-row cups.
4" Turbo Cups: light weight and has 7/8" arbor with washer to center on 5/8" spindle if needed. Fit small grinders with 5/8" spindle and/or 7/8" arbor tightening nuts. Cups with 3/4 arbors are also available on request.
4.5" Double-row cup: Heavier and last much longer and designed for smoother surfaces. Ideal for grinding down the top cream of concrete to expose aggregates before polishing. Two types are available: 7/8" arbor and 5/8-11 female mounting thread.
4"x2" Silicon Carbide Grinding Wheels: heavy duty grinding wheels that will grind any natural and artificial stones. We have coarse grit #24 rated 6500 rpm . This wheel is great for grinding curves such as rounding out the corners or making an oval sink cutout. For dry grinding only!
Locknut: 5/8-11 thread and 7/8" rim for mounting grinding cups and saw blades. One set including two nuts
and one
wrench. Will work with any standard grinders or polishers as new nuts
or replacement.
Select Cups or Wheels
- Densifier/Sealer A must have to get a shiny polished finish!
Most granite and concrete surfaces will not shine beyond polishing by grit #800. This is why you need to
treat the
surface with densifier to fill in the pores before polishing further. Most
densifier are sold as liquid which is quite expensive to ship (most have to be
shipped as hazardous materials). We have
our densifier in powder form for shipping so that you can add purified drinking water to
reconstitute to the working volume. One quart is enough for 50 to 150 ft2.
Our curing agent will permanently seal the surface with real stone for
excellent heat tolerance.
- Diamond Polishing Drums
2" polishing drums are made with solid aluminum; 3" polishing drums are made with
solid plastic
resin and brass fitting. These have female 5/8-11 thread to fit
standard polishers. Grit #50, #100, #200, #400, #800, #1500, and #3000
are available. Recommend wet use for longer life.
Select 2" Drums
Select 3" Drums
- Coloring Kit for Epoxy Bonding and Repair
Twelve different colors that can also be mixed together to make more colors. Each
come in 1 Oz tube and can be mixed with epoxy and used for bonding
natural and artificial stone. Buy any individual color you need or the
entire kit of 12 colors. ALMOND, BLACK, BLUE, BROWN, CHOCOLATE, CREAM,
GRAY, GREEN, MUSTARD, RED, WHITE, and YELLOW are available. Fully
compatible with epoxy glues that dry clear or clear yellow. Use only as
much color as necessary to achieve color matching.
- Saw Blades
We have continuous blades for smooth straight cutting and turbo blades for rough curve cutting.
5" blades come
with standard locknut 7/8" arbor plus a washer to reduce to 5/8" for
circular saw and table saw. 4-3/8" (110mm) blades come with 20mm
arbor and a reducing washer to 5/8".
- Specialty Pads
Convex Pads and Rubber Velcro Holder: We have 4" size convex pads and Velcro holder for use to polish concave surfaces such as
the inside of a sink. Buy a full set of all pads, an economy set of
just #50, #200, #800, #3000 and a Velcro holder, or select only
the grit # you need. Eight different grits are available: #50, #100,
#200, #400, #800, #1500, #3000, and BUFF. Use low speed <2000 rpm with
these pads.
- Miscellaneous Velcro Holders or Backing Pads
We have three main types of Velcro holders to attach to the polishers, all come with 5/8-11 female thread.
Plastic & foam Velcro holders are the least expensive, light weight, and can allow the pad to bend for dimples and curves and then recover its shape. This does not have the center water feeding hole, but can be modified to have one. Come with standard 5/8-11 thread.
Select Size of Foam Velcro Holders
Rubber Velcro holders are the most standard tool attachments for these polishing pads. What we have are made with soft rubber, but will only flex a little so they are consider semi-rigid. Come with standard 5/8-11 thread.
Select Size of Rubber Velcro Holders
Aluminum Velcro holders are the most durable. These are rigid single-piece aluminum construction. The aluminum holders can also can tolerate higher speed if heat is not a problem for the Velcro tape. Come with standard 5/8-11 thread.
Select Size of Aluminum Velcro Holders
- User Guides required Acrobat or PDF reader to view or download for free here
You need to have Flash Player and allow script to run to view the images on this page.Our main office is near wine country Temecula California. Copyright © Granite Polishing Pads 2009-2013.
Tel. 949-891-8124
Fax 866-246-9593